How To Setup DLink Wifi Router DSL-2750U (Without Lan Cable)

Hello Everyone! Here in this tutorial i will show you How to Setup DLink Wifi Router DSL-2750U for Home and business users, after the installation you can use internet on Lan or wirelessly on any wifi enabled devices. Now just follow these simple steps

STEP-1 Attach internet cable to “WLAN” port of your Wifi router

STEP-2 Now Connect LAN cable’s one end to router LAN port and other end to your laptop LAN port OR connect using Wifi signal. After setup you can remove the lan cable if you use it. In my scenario i am using Wifi connection to connect with my Wi-Fi device.

How to Setup DLink Wifi Router

STEP-3 Connect power and turn on the wifi router. If this setup is not first time then before setup you have to reset the router, Press and hold the reset button on router for few seconds to reset your device.

STEP-4 Open any browser on your laptop and type “192.168.0.1” in the address bar and Hit the Enter key. This is the default IP Address for d-link routers. It will ask for User Id and Password.
Default User Id for D-Link DSL-2750U WiFi router Is:

User Id- admin
Password -admin

wifi_router_login

Enter admin in both User Id and Password and click on “OK”.

STEP-5 Now start the “Setup Wizard”, and enter the ISP details as shown below

isp_setting

STEP-6 Enter your Static IP details such as “ip address”, “Subnet Mask” “Default Gateway” “DNS Server” and click on “Next” to continue. If you not have these details, discuss with your Internet service provider.

static_ip_details

STEP-7 Enable your Wireless Network, assign a SSID, wifi password and click “Next” to continue.

configure_wireless_network

wifi_password_reset

Your Wifi device will be reboot. After reboot you can check your configuration by connecting to your wifi with new password.

For more details watch this video “How to Setup DLink Wifi Router DSL-2750U”.

Leave a Reply

Your email address will not be published. Required fields are marked *